LOGIN PRODUCTS VIEW CART()

Accessories

clamping platesB&B Manufacturing® is a leading supplier of Precision Mechanical Component and Power Transmission accessories. Accessories such as Clamping Plates, Idler shafts, Idler Shoulder Studs, and a Sonic Tension Meter,

Idler Shafts:

  • With set collars
  • Hardened
  • Ground
  • Shouldered and threaded into units
  • With set screw

Aluminum Clamping plates available from stock for open-ended belts in the following pitches and sizes:

  • MXL pitch for standard belt widths of 0.25”, 0.375”, and 0.5”
  • XL pitch for standard belt widths of 0.25”, 0.375”, and 0.5”
  • L pitch for standard belt widths of 0.375”, 0.5”, 0.75”, and 1”
  • H pitch for standard belt widths of 0.5”, 0.75”, 1”, 1.5”, 2”, and 3”
  • T5 pitch for standard belt widths of 25 mm
  • T10 pitch for standard belt widths of 25 mm, 50 mm, 75 mm, and 100 mm
  • AT5 pitch for standard belt widths of 25 mm
  • AT10 pitch for standard belt widths of 25 mm, 50 mm, 75 mm, and 100 mm
  • 3 mm Powerhouse® HTD® pitch for standard belt widths of 6 mm, 9 mm, and 15 mm
  • 5 mm Powerhouse® HTD® pitch for standard belt widths of 9 mm, 15 mm, and 25 mm
  • 8 mm Powerhouse® HTD® pitch for standard belt widths of 20 mm, 30 mm, 50 mm, and 85 mm
  • 14 mm Powerhouse® HTD® pitch for standard belt widths of 25 mm, 40 mm, 55 mm, 85 mm, 100 mm, 115 mm, and 170 mm
  • 2 mm Powerhouse® pitch for standard belt widths of 3 mm, 6 mm, and 9 mm
  • 3 mm Powerhouse® pitch for standard belt widths of 6 mm, 9 mm, and 15 mm
  • 5 mm Powerhouse® pitch for standard belt widths of 9 mm and 15 mm
  • 8 mm Powerhouse® pitch for standard belt widths of 20 mm, 30 mm, 50 mm, and 85 mm
  • 5 mm Powerhouse® MX pitch for standard belt widths of 6 mm, 9 mm, 15 mm, and 25 mm
  • 8 mm Powerhouse® MX pitch for standard belt widths of 12 mm, 21 mm, and 36 mm
  • 14 mm Powerhouse® MX pitch for standard belt widths of 20 mm, 37 mm, 68 mm, 90 mm, and 125 mm.

Contact One of Our Sales Representatives Today
or call us today at | 877.787.4022

Taper-Lock®, HTD®, Poly Chain®, PowerGrip®, GT2®, and GT3® are trademarks of the Gates® Corporation.
QD® is a trademark of TB Woods, Inc.
FHT® is a trademark of Fenner Precision.